Hello, your Dr. Meng is here again~
Today, I will share with you: related issues about charging the Dr. Meng smart disinfecting toothbrush holder. These questions are many users and friends consulted more in the use, specially sorted out, I hope to help everyone~
1. Is this plug-in or rechargeable?
It is charging. It is powered by a 5200 mAh high-performance lithium battery. Generally, it will be automatically disinfected after it is fully charged and turned on, so there is no need to pay too much attention.
2. How long does it take to charge? How long can it be used once full?
It needs to be fully charged before the first use. It is recommended that it be more than 6-12 hours.
A full charge can be used for about 3-5 months. (Calculated based on induction 3-5 times per day)
If there are many people in the family or the frequency of use is more, the installation location often has people passing by, and the number of times people are sensed, the machine will always be in a state of power consumption, and the power consumption will be relatively faster.
3. Which charging cable and charging head are suitable?
General charging heads are fine, and charging heads such as mobile phones, computers or other accessories can be adapted.
We provide a 88cm four-core data cable. Conventional small household appliances or electrical appliances provide a two-core power cable, which only provides charging functions. The data cables we provide can not only provide stable charging functions, but also data transmission. effect.
Note that the product does not support fast charging, so some fast charging heads cannot charge the product and need to be replaced with ordinary ones. The 1A charging head is just fine.
You are not sure which charging head is suitable, and you can directly use the laptop or computer charging port for charging.
4. Why doesn't the light turn on after charging?
After fully charged, you need to unplug the power supply and press and hold the power button for 3 seconds to turn it on. The light will only turn on after power on.
* In response to the problem of forgetting to turn on the phone, the latest version is gradually optimized to become: after fully charged, unplug the power, that is, automatically turn on by default. If the automatic boot procedure is not triggered, you can also press and hold the power button for 3 seconds to boot.
5. The light does not turn on when charging? Can't charge?
In order to maximize the use of the battery, each time the battery is used up, it will be lower than the battery's power supply voltage, causing the battery to not be able to supply power to the indicator. You need to charge the host for a while, and then watch it after a while, there will be an indicator display .
If there is no response after charging for a long time, try to change the data cable or plug or socket to confirm that it is the problem of the data cable, plug, socket, or machine.
6. Does it have to be installed near the socket to charge?
Not used. The main unit is separated from the board and can be removed for charging. If the socket is nearby, you can also charge it directly. It's your convenience.
